• A suitable hard disk drive. You have two options here - the official Sony hard disk drive, or a standard IDE hard disk drive with a capacity of AT LEAST 40GB.

If you use a standard IDE drive, you will need to make sure that it actually fits into your network adapter. There are a few known compatibility issues with some non-Sony hard disk drives, please see the compatibility section for more information. Both a Sony and standard IDE hard disk drive are shown below. • A PS2 with a 'DEV9' expansion port. All PS2's will have this expansion port except for the first three Japanese models (SCPH 10000, SCPH 15000 and SCPH 18000) which have a PCMCIA expansion port instead. These models are not supported by HDLoader. How to connect a hard disk drive to your PS2 • If you have an official Sony hard disk drive, then please install it according to the directions in its manual.

Results 1 - 48 of 583 - C7 Figure 8 Power Cable Mains Plug for PS1 Fat, PS2 Fat, PS3 Slim Xbox Console. NEW Component AV HD Cable for PlayStation 2 3 PS2 PS3 TV. Works great with HD-Loader or OPL on Mcboot (See YouTube for. SATA interface network card supports 2.5 3.5 serial port hard disk.

If you will be using a standard IDE hard disk drive, then please install it according to the following directions. • The first step is to make sure that the hard disk drive you intend to connect to your PS2 will actually fit into your network adapter. Check that the IDE and power ports on your hard disk drive properly align with the IDE and power connectors on your network adapter, as shown below.